Cement is porous and absorbs liquids. Stains show up from spilled material, food, pets, fertilizers and, of course, oil drips. If you’re cleaning the patio, you may see stains from water seeping through potted plants. Cleaning the cement isn’t a difficult job but it does take some effort and time.

Before you clean your cement, the first thing that you need to do is to get the area clear of furniture or other things that can be in the way of your cleaning. Using a broom, clean the floor by sweeping the concrete to remove dust and debris. To protect plants and other furniture when cleaning cement, make sure to cover them with a tarp or something that cleaning solutions cannot penetrate. The safest alternative is to remove them from the cement. Make sure to cover the electricity outlet and cords too.https://www.diynetwork.com/how-to/maintenance-and-repair/cleaning/how-to-clean-a-cement-patio

Use a grease remover on greasy food stains or from oil drips if you’re cleaning the garage floor. Follow the instructions on the package. You may have to use more than one application. Spot treat any dried on stuff with any household cleaner. Saturate the cement. Cover with a wet rag and let the cleaner penetrate whatever is dried on. Scrape up any stuff with a putty knife.https://highpowerclean.com.au/vacate-cleaning-melbourne/

To create your own cement cleaner, mix 5 gallons of water with oxygen bleach. Put it in a bucket then pour it on a tank sprayer. Spray the solution all over the concrete, making sure that you cover each area. Spray enough cleaning solution making sure they won’t dry out easily. If you don’t have a sprayer, spill the solution onto the cement by tipping the bucket. After you spray, wait for about 20 minutes and allow the cleaning solution to work. You might see bubbling as the oxygen is released.

After you let the oxygen bleach and water solution to sit on the floor for a couple of minutes, you then need to scrub it with a long brush. Scrub all areas including the small corners and make sure to sweep off small dirt and debris.

Let the cement dry. There’s no need to rinse.

To completely clean concrete, it will be good to have a pressure washer. If you do not have it, you can rent one or borrow from someone you know. Adjust the nozzle and use its fan function to sweep the floor. The more concentrated the water flow the smaller an area you can clean but you’ll get the cement cleaner. Get professional help from cleaning services in Melbourne.